Connecting the SDI Signals24[Internal Signal Pattern]Press the button to change the pattern of the internalsignal when the internal signal is displayed. With everypress of the button, the picture switches between [White]and [PLUGE].[Internal Signal Setting][Security] menuConnecting the SDISignalsSingle Link 3G/HD-SDI, Dual Link 3G-SDI, and QuadLink 3G/HD-SDI signals can be input to the SDI INconnectors of this unit.Up to 4-channel Single Link 3G/HD-SDI signals, up to2-channel Dual Link 3G/HD-SDI signals, or 1-channelQuad Link 3G-SDI signals can be input. Use theappropriate input connectors depending on the inputsignal, referring to the tables below.Connecting the Dual Link 3G-SDI signalorWhen only 1-channel Dual Link 3G-SDI signal is input,the Single Link 3G/HD-SDI signals of up to 2 channelscan be input via the SDI IN connectors that are not usedfor the Dual Link 3G-SDI signal.Connecting the Quad Link 3G/HD-SDI signalTo input 2-sample interleave division signalsTo input Square division signalsSubmenu Setting[Internal Signal] Select the internal signal display. [On] [Off][Pattern] Select the pattern of the internal signal. [PLUGE] [White]Submenu Setting[Password Lock] You can protect the setting with apassword so that the settings saved inthe color temperature for [User1] andthe User Preset for [User Preset1]cannot be changed.When you protect the values with apassword, set a four-digit number.The initial password is “0000”. Whenyou use [Password Lock], change theinitial password first. [Color Temp./User Pre.]: Select [On]to protect the setting valuessaved in the color temperaturefor [User1] and the User Presetfor [User Preset1]. Select [Off]to not protect with the password. [Change Password]: Changes thepassword.Connector Input signalSDI IN 3G-SDI Link 1SDI IN 3G-SDI Link 2Connector Input signalSDI IN 3G-SDI Link 1SDI IN 3G-SDI Link 2Connector Input signalSDI IN 3G-SDI Link 1SDI IN 3G-SDI Link 2SDI IN 3G-SDI Link 3SDI IN 3G-SDI Link 4Connector Input signalSDI IN Mapping signal of Sub image 1 (upper-left screen)SDI IN Mapping signal of Sub image 2 (upper-right screen)SDI IN Mapping signal of Sub image 3 (lower-left screen)SDI IN Mapping signal of Sub image 4 (lower-right screen)