Sony BKMW-E3000 Installation Manual

Also see for BKMW-E3000: Operation manual

1-27 (E)BKMW-E30001-4-3. Configuring Trap Control (Professional VTR Category Variables)In this window, the setting for control of trap sending is available.These traps become valid notifications for fine monitoring e-VTR with SNMP Manager.Time difference between Local Time and GMT. Time DifferenceSelects the time difference between the local time and GMT.Trap Control. Channel Condition (Video) TrapThis is the trap that notices when the [CHANNEL CONDITION] on the control panel of the e-VTRturned into RED level.When this item is set to “on”, the tape position that detected RED level is specified from the time codeinformation included in the trap notice message.. Channel Condition (Audio) TrapThis is the trap that notices when the [CHANNEL CONDITION] on the control panel of the e-VTRturned into RED level.When this item is set to “on”, the tape position that detected RED level is specified from the time codeinformation included in the trap notice message.. Lost Lock TrapThis is the trap that notices when Servo Lost Lock status was generated during PLAY mode.When this item is set to “on”, the tape position that Servo Lost Lock status was generated is specifiedfrom the time code information included in the trap notice message.To enable the settingsClick the Execute button.m. The changed contents are stored in e-VTR even if the power is turned off.To cancel the operation, click the Reset button.. To enable setting of the trap control from SNMP Manager, it is necessary to enter the “Read-WriteCommunity” on the SNMP Agent Variables Window. (Refer to “1-4-1. Configuring SNMP”.)

/ 34

Related manuals for Sony BKMW-E3000