Sony BKMW-E3000 Installation Manual

Also see for BKMW-E3000: Operation manual

1-11 (E)BKMW-E3000CN3CN2 Connection cord(Supplied accessory)Harness (LED)(Supplied accessory)IF-885 boardBVTT3 x 6(Suppliedaccessory)Blank sheet(Supplied accessory)Blank sheet(Supplied accessory)ETHERNET panelETHERNET panelIF-885 boardBVTT3 x 6ETHERNET panelRedUpper sideLower side YellowCoaxial connector converter10. Attach the IF-885 board.For the recorder(1) Attach the coaxial connector converter to theETHERNET panel using the two screws.nBe sure to position the coaxial connector converteras shown in the figure.(2) Attach the IF-885 board to the ETHERNET panelusing the two screws (BVTT3 x 6) of the suppliedaccessories.For the player(1) Attach the IF-885 board to the ETHERNET panelusing the two screws (BVTT3 x 6) of the suppliedaccessories.(2) Affix the blank sheet of the supplied accessoriesonto the ETHERNET panel.11. Attach the ETHERNET panel to the VTR.(1) Arrange the connection cord and the harness(LED) of the supplied accessories as shown in thefigure.(2) Connect the connection cord to the connector CN2on the IF-885 board, and connect the harness(LED) to the connector CN3 on the IF-855 board.BVTT3 x 6(Suppliedaccessory)ETHERNET panelIF-885 board