Sony 4-188-206-11(1) Operating Instructions Manual

29Additional InformationAdditionalInformationTroubleshootingIf you experience any of the followingdifficulties while using the player, use thistroubleshooting guide to help remedy theproblem before requesting repairs. Shouldany problem persist, consult your nearestSony dealer.There is no picture or the picture is notoutput correctly., Check that all the connecting cables aresecurely connected (page 12)., Switch the input selector on your TV todisplay the signal from the player., Reset the video output resolution to thelowest resolution by pressing x on theplayer for more than 10 seconds., For HDMI connections, try the following:1Turn the player off and on again. 2Turnthe connected equipment off and on again.3Disconnect and then reconnect the HDMIcable., The HDMI OUT jack is connected to a DVIdevice that does not support copyrightprotection technology., For HDMI connections, check the “OutputVideo Format” settings in the “ScreenSettings” setup (page 23)., When the analogue signals are also output,set “BD/DVD-ROM 1080/24p Output” to“Off” in the “Screen Settings” setup(page 23)., For BD-ROMs, check the “BD/DVD-ROM1080/24p Output” setting in the “ScreenSettings” setup (page 23).The display language on the screenswitches automatically when connected tothe HDMI OUT jack., When “Control for HDMI” is set to “On”(page 26), the display language on thescreen automatically switches according tothe language setting of the connected TV (ifyou change the setting on your TV, etc.).Picture,continued