243 Switch the input selector on your TV so thatthe signal from the recorder appears onyour TV screen.“Initial settings necessary to operate the DVDrecorder will be made. You can change themlater using setup.” appears.• If this message does not appear, select “EasySetup” in the “Setup” display to run EasySetup (page 111).4 Press ENTER.The setup display for selecting the languageused in the on-screen display appears.5 Select a language, and press ENTER.The Tuner Preset function automaticallystarts.To set the channels manually, see page 100.6 After the download or search is complete,the Clock function automatically starts.If the current date and time is not set, set theclock manually.Press M/m to set the day and press ,. Set themonth, year, hour, minutes in the same way.Set “Auto Adjust” to “On” to activate theAuto Clock Set function. The recorder adjuststhe clock automatically whenever the recorderis turned off.7 Press ENTER.The setup display for selecting the picture sizeof the connected TV appears.8 Select the setting that matches your TVtype.“4:3 Letter Box”: For 4:3 screen TVs.Displays “wide screen” pictures with bandson the upper and lower sections of the screen.“4:3 Pan Scan”: For 4:3 screen TVs.Automatically displays “wide screen”pictures on the entire screen and cuts off thesections that do not fit.“16:9”: For wide-screen TVs or TVs with awide screen mode.For details, see “Video Settings (Video)” onpage 102.Easy SetupSelect the screen language.No DiscEnglishFrançaisEspañolDeutschItalianoNederlandsSearching for receivable channels.Scanning... Please wait.Easy SetupNo Disc25%Searching for clock data.Please wait.Easy SetupNo DiscEasy SetupNo DiscSet the time and date manually.Day Month YearHour Min Auto Adjust12:00Mon01 0112 : 00 On2007Easy SetupSelect your TV screen type.No Disc 10:1016 : 94 : 3 Letter Box4 : 3 Pan Scan
