Siemens sitrans PROBE LU Instruction Manual

Also see for sitrans PROBE LU: Quick start manual Quick start manual Instruction manual Operating instructions Quick start manual

Contents

7ML19985HT01 SITRANS Probe LU ñ INSTRUCTION MANUAL Page 7SpecificationsInterfaceï HART standard, integral to analog outputï configuration Siemens SIMATIC PDM (PC), or HART handheldcommunicator, or Siemens Milltronics infrared handprogrammerï analog output 4ñ20 mA ± 0.02 mA accuracyï display (local) multi-segment alphanumeric liquid crystal with Bargraph (representing level)Programmer (infrared keypad)Siemens Milltronics Infrared IS (Intrinsically Safe) Hand Programmer: for all locations,including hazardous.ï approval ATEX II 1 G, EEx ia IIC T4, SIRA 01ATEX2147ï ambient temperature −20 to 40∞ C (−5 to 104∞ F)ï interface proprietary infrared pulse signalï power 3V lithium battery (non-replaceable)ï weight 150 g (0.3 lb)ï color blackMechanicalProcess Connectionsï threaded connection 2î NPT, BSP, or G/PFï flange connections 3" (80 mm) universal flangeï other connections FMS 200 mounting bracket, or customer-suppliedmountTransducer (2 options)ï ETFE (ethylene-tetrafluoroethylene), orï PVDF (polyvinylidene fluoride)Enclosureï body construction PBT (polybutylene terephthalate)ï lid construction hard-coated PEI (polyether imide)ï conduit entry 2 x M20 cable gland, or 2 x 1/2" NPT threadï ingress protection Type 4X / NEMA 4X, Type 6 / NEMA 6, IP67 (see notebelow)Notes:ï Please check the ambient and operating temperatures underEnvironmental on page8, andProcess on page 8; also checkApprovals (verify against device nameplate) onpage 8, for the specific configuration you are about to use or install.ï The use of approved watertight conduit hubs/glands is required for Type 4X /NEMA 4X, Type 6 / NEMA 6, IP67 (outdoor application).