Menu
Siemens sitrans LR 400 Instruction Manual
Also see for SITRANS LR 400: Instruction manualInstruction manual and users guideInstruction manualInstruction manualQuick start manual
                                                                                                | |
Contents
|
Page 38 SITRANS LR 400 ñ INSTRUCTION MANUAL 7ML19985FH03Parameters (HART)4.1.4: Temperature Unit (F = °C)Unit of the sensor temperature4.1.5: Other units (F = SI)Units system for all other unitsWith this function, determine whether you want to enter the operating parameters (seeParameter 4.2) in SI or in British Imperial (US/UK) units. The selected units of themeasured value output and sensor temperature as well as the decimal point are notinfluenced by this setting.4.2: Operating ParametersWith this parameter group, define the parameters of your vessel, the measuring mediumand the calculation of the measured signal. Signal-specific default settings such as thefailure signal or the upper current limit of the analog output signal are assigned to thefunctions of the respective outputs (see Parameters 4.3 and 4.4).4.2.1: Tank Geometry4.2.1.1: Nozzle Height = Parameter 1.34.2.1.2: Tank Height = Parameter 1.44.2.1.3: Stilling Pipe? (F = no)Stilling pipe available?By selecting yes or no, you specify whether the device is mounted on a stilling pipe. If youselect yes, Parameter 4.2.1.3.2 is enabled so you can specify the internal diameter of thestilling pipe.Value∞C∞FKValue SI unitUS/UK unitValue yesno |
Related manuals for Siemens SITRANS LR 400
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved