Siemens optiPoint 410 User Manual

Also see for OptiPoint 410: Administration guide Operating instructions User manual Administrator's manual Operating instructions

Contents

Step by StepCustomizing the Telephone94o : Enter or modify name or number and confirm. The rele-vant key is labelled automatically.or> : Select and confirm to retain the existing label.The phone is now ready to dial with this function key inthe programmed level.Example 3: Assigning a Number or Name to aFunction KeyYou can assign frequently dialed numbers to a functionkey. When you press the key, the stored telephonenumber is shown in the display, and you can set up theconnection.> : Select and confirm.> : Select and confirm.For programming the first level:: Confirm. You are prompted to press a key.Press the function key to be programmed (the associat-ed LED blinks).: Confirm.> : Select and confirm.or> : Select and confirm.o : Enter the telephone number or name to be stored andconfirm.When programming function keys on an optiPoint 420or optiPoint self labeling key module the electroniclabeling function Label is displayed with the followingprompt:: Confirm to adapt the electronic key labeling.o : Enter or modify name or number and confirm. The rele-vant key is labelled automatically.Continue? >Selected dialingIf you are using an optiPoint 410 write the num-ber on the label card Æ page 200.05=Setup? >4=Function keys? >1=Non shifted keys? >02=Selected dialing? >Program destination #? >Program dest. Name? >Change?