Guidelines and standards14Siemens Building TechnologiesFire Safety & Security Products 03.20072 Guidelines and standards2.1 EU DirectiveThe product meets the requirements of the EU Directive 89/336/EEC onelectromagnetic compatibility The EU declaration of conformity is available from:Siemens Building TechnologiesFire & Security Products GmbH & Co. oHG76181 Karlsruhe, GermanyEU Directive 89/336/EEC on electromagnetic compatibilityConformity with the EU Directive 89/336/EEC is demonstrated by compliance withthe following standards:Emitted interference: EN 61000-6-4EN 55022 Class AResistance to interference: EN 50130-4EU Directive 73/23/EEC „Low-Voltage Directive”Compliance with the European Directive 73/23/EEC has been proven by testingaccording to the following standard:Safety: EN 60950-12.2 UL and FCC complianceThis product complies with the requirements of the StandardsUL 2044 Commercial Closed-Circuit Television EquipmentandFCC Part 15 – radio frequency devices Class A digital device.FCC informationThis equipment has been tested and found to comply with the limits for a Class Adigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference when the equipment isoperated in a commercial environment.This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instruction manual, may causeharmful interference to radio communications.Operation of this equipment in a residential area is likely to cause harmfulinterference in which case the user will be required to correct the interference at hisown expense. Shielded cables should be used with this unit to ensure compliancewith class A limits.