Siemens SISTORE AX9 250 User Manual

Contents

Troubleshooting107Siemens Building TechnologiesFire Safety & Security Products 03.200710 TroubleshootingProblem Possible solutionNo power z Check power cord connections.z Confirm that there is power at the outlet.No live video z Check camera video cable and connections.z Check monitor video cable and connections.z Confirm that the camera has power.z Check camera lens settings.Live video very bright If a cable is attached to the “Loop” connector, make certain it isconnected to a properly terminated device.DVR has stopped recording If hard disk drive is full, you will either need to delete video or setthe DVR to the Overwrite Mode.The icon displays, however,the DVR is not recordingWhen the DVR is in the Pre-Event recording mode, the yellowand display when there is no event, and the DVR is notrecording. The red and display when any event occurs andthe DVR starts recording.