Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual

Contents

Configuration24Siemens AG06.2010When the DVR is in the Event mode, the red icon displays at the top-leftcorner of the screen. The DVR will record and displays the icon at the top-left corner of the screen when any event occurs. When the DVR is in the Pre-Event recoding mode, the yellow icon displays when there is no event, andthe DVR is not recording. When the DVR is in the Pre-Event mode, the redand display when any event occurs and the DVR starts recording.When the DVR is in the Time & Event mode, the DVR will follow the Timesettings and the icon displays. The DVR follows the Event settings and theicon displays.5. Highlight the box under the Channels heading and press the button to selectwhich cameras will be recorded (Simple Mode only).6. Highlight the box under the Settings heading and press the button to definethe recording settings. You can set the ips and quality of the recording for any modes you set up in theMode column. If you do not set the ips and quality in the Settings column, theDVR will follow the default settings. See below for details.Fig. 12 Schedule – setup screen (Advanced Mode)Time-lapse (Time) Video LossAlarm-In Video BlindMotion Text-InNOTEChannels that are not defined will use the setting values of the previous schedule item..NOTEWhen multiple events are detected at the same time from a specific channel, the DVR will recordevent video with the high setting values if the ips, Quality, Resolution and Dwell values of events aredifferent from each other. However, the ips will be reset to the supported maximum value when theips, Quality, Resolution and Dwell are set to the highest value (Advanced Mode only).