Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual

Contents

Configuration17Siemens AG06.2010Enter/Pause button When in the setup mode, pressing the button selects ahighlighted item or completes an entry that you have made.In the live monitoring mode, pressing the button freezes the currentscreen and the screen displays icon. When in the playbackmode, pressing the button pauses playing video.Up, Down, Left, Right ArrowbuttonsThese buttons are used to navigate through menus and GUI.The Up and Down arrow buttons are also used to change numbersby highlighting a number in the menu and by increasing ordecreasing the number’s value.These buttons are also used to control Pan and Tilt when in the PTZmode. In the playback mode, pressing the button plays videobackward at high speed. Pressing the button again toggles theplayback speed from , and , and the screen displays, and respectively. While playing video, pressingthe button plays video forward at high speed. Pressing the buttonagain toggles the playback speed from , , and , andthe screen displays , , and respectively. When inthe pause mode, pressing the button moves to the next imageand pressing the button moves to the previous image.ID button on remote control If a DVR System ID is set to 0, the infrared remote control willcontrol that DVR without any additional operations. (Refer to Section7.13.1: Information screen for further information on setting theSystem ID.) If the system ID is 1 to 4, you must to press the IDbutton on the remote control and then press the number button (1 to4) in order to control that DVR. If the System ID of two or moreDVRs is set to 0, those DVRs will react to the infrared remotecontrol at the same time.7.2 Remote controlsFig. 2 Infrared remote control1 ID button 5 Alarm button2 Camera buttons 6 Play/Clip button3 Enter/Pause button 7 PTZ/Zoom button4 Menu button 8 Arrow buttons7.3 Turning on the powerConnecting the power cord to the DVR turns on the unit. The unit takesapproximately 60 seconds to initialize.