Siemens SIREMOBIL Iso-C Troubleshooting Manual

Also see for SIREMOBIL Iso-C: Installation instructions Installation and setting instructions Service instructions Installation and setting instructions Service instructions

52 Adjustments / ProgramsSIREMOBIL Iso-C SPR2-230.840.01.01.02 © Siemens, 200808.08 CS PS SPPage 52 of 148For internal use onlyCollimator, X-Iris 5.5NOTE Because of the mechanical hysteresis of the semi-transpar-ent slot diaphragm, open the collimator blades to maximumaperture prior to adjusting the radiation iris.WARNING X-ray radiation!¹ See (Safety information / p. 11).¹ Radiation protection is required. Wear a lead apron.x Attach the center cross in the center of the image intensifier input screen.x Connect the service PC to the serial interface of the SIREMOBIL Iso-C.x Start the service program.x Select the "Adjustment, Calibration" menu.x Answer the query with "yes".x Select "X-Iris" in the "Function Groups" combo box.x In the window "Available Functions:" select "1. Init (Limits Off / Autosearch)" and clickExecute.x Close the status window by clicking the OK button.x For the query "Do you want to reset the Unit", click "No".x The X-Iris can now be completely opened and closed with the X-Iris keys.x Select I.I. survey format.X x During fluoroscopy, adjust the X-Iris by opening and closing it with the X-Iris keys sothat the collimator blades are still visible along the edge of the I.I.x Select "2. II. - Full Format Position" on the service PC and click "Execute".x Close the status window by clicking the OK button.x For the query "Do you want to reset the Unit", click "No".x Switch to zoom format.X x During fluoroscopy, adjust the X-Iris by opening and closing the X-Iris keys so that thecollimator blades are still visible along the edge of the I.I.x Select "3. II. - Zoom Format Position" on the service PC and click "Execute".x Close the status window by clicking the OK button.x For the query "Do you want to reset the Unit", click "No".x Open the X-Iris completely.x Select "4. CEX Position" on the service PC and click "Execute".x Close the status window by clicking the OK button.x For the query "Do you want to reset the Unit", click "No".x Close the X-Iris completely.X x Release fluoroscopy. The X-Iris must close to < 4.5 cm .