Siemens SINUMERIK 840DE Operation & Programming Manual

Also see for SINUMERIK 810D: Programming manual Programming manual Programming manual Function manual Function manual

Contents

8 Parts Program Management 08.028.8 Read in a file 8© Siemens AG, 2002. All rights reserved8-154 SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition8.8 Read in a fileSequence of operationsPrecondition You have selected the interface for your data device correctly.Read-inRS-232-CSelect the soft key labeled "Read-in RS-232-C".The "Read-in RS-232-C" window is opened.Start the transfer from the other side (on the data device).Start When you select the soft key "Start", the data are copied in the pathyou have specified.The names of the imported files and the number of bytes transmittedare displayed.Stop You can interrupt the data import operation by selecting the "Stop" softkey.Start Press the soft key labeled "Start" again to restart import of the files,and start the operation again at the opposite end (on the data device).Selecting the "Back" soft key returns you to the higher-level directoryoverview. The "Read-in RS-232-C" function remains active if aRS-232-C transmission has already been started.NC start is not possible while the files are being imported.8.9 Error/transmission logFunctionSelect error logErrorlogWhen you press the soft key "Error log" a log confirming successfulfile transfer is output.• For files to be exported− the file name including path name and− a status acknowledgment.• For files to be imported− the file name and the first line, which generally contains thepath, as well as− a status acknowledgment.