Menu
Siemens SIMATRIX NEO V2 Configuration Manual
                                                | |
Contents
|
Total system with full optionsa previously selected monitor and to switch video recorders and save images toimage memories.The way detection groups are allocated to cameras, the way alarm images areallocated to individual monitors and the choice between group or individual signaltransfer are all freely programmable.5.3 Settings on the CD-ROMThe basic program and 6 alarm programs on the CD-ROM supplied with the deviceprovide a level of set-up that allows the system to be put to immediate use.The programs supplied cover the most common applications. They also make iteasier to adjust programming to suit individual needs.The SIMATRIX NEO V2 is set to use alarm program 2 at the factory. The other alarm programs aredescribed in the control software manual.5.3.1 Basic programThe SIMATRIX NEO V2 can be operated with or without alarm processing. Thesame basic program is used in both cases.Number of devices that can be connected– Cameras: 1 to 48– CDC: 1 to 48– Monitors: 1 to 4– Keyboards: 1 to 4– IVM-NT operating stations: 1 to 3The basic program offers the following functionality:– Keyboard 1 controls monitors 1 to 4Keyboards 2 to 4 control monitors 2 to 4– Monitor cycles can be set for all monitors and can be password (PIN code)protected– Camera designations, the date, the time and camera failure messages can all bedisplayed on the monitor– The keyboard can be used to remotely control the most recently switchedcamera via the SIMATRIX NEO V2 (if the camera is equipped with pan/tilt andlens drives)– Presets per PTZ-drive (CDC) can be parameterized (Camera with special PTZ,Lens with integrated potis and special CDC necessary)17Siemens ABSecurity Products |
Related manuals for Siemens SIMATRIX NEO V2
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved