Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Also see for SIMATIC NET SCALANCE S615: Operating instructions Configuration manual Operating instructions

DescriptionThe page contains the following boxes:● SNTP ClientWhen enabled, the device receives the system time from an SNTP server.● Current System TimeShows the current date and current normal time received by the IE switch. If you specify atime zone, the time information is adapted accordingly.● Last Synchronization TimeShows when the last time-of-day synchronization took place.● Last Synchronization MechanismShows how the last time synchronization was performed. The following types are possible:– Not setThe time was not set.– ManualManual time setting– SNTPAutomatic time-of-day synchronization with SNTP– NTPAutomatic time-of-day synchronization with NTP– SIMATICAutomatic time-of-day synchronization using the SIMATIC time frame● Time ZoneIn this box, enter the time zone you are using in the format "+/- HH:MM". The time zonerelates to UTC standard world time.The time in the "Current System Time" box is adapted accordingly.● Daylight Saving TimeShows whether the daylight saving time changeover is active.– active (offset +1 h)The system time was changed to daylight saving time; in other words, an hour wasadded. You can see the current system time at the top right in the selection area of theWBM.The set time continues to be displayed in the "System Time" box.– inactive (offset +0 h)The current system time is not changed.Configuring with Web Based Management4.5 "System" menuSCALANCE S615 Web Based Management164 Configuration Manual, 11/2019, C79000-G8976-C388-08