Siemens SIMATIC Manual

Also see for Simatic S7-300: User manual Getting started Technical data Operating instructions Installation manual

Analog modules6.16 Analog IO module SM 334; AI 4/AO 2 x 8/8 Bit; (6ES7334-0CE01-0AA0)S7-300 Module dataManual, 06/2017, A5E00105505-AJ 481Technical specificationsSensor selection dataInput ranges (rated values) / input impedance• Voltage• Current0 V to 10 V/100 k Ω0 mA to 20 mA/50 ΩMaximum voltage at voltage input (destruction limit) max. 20 V continuous; 75 V for max. duration of 1 s(duty factor 1:20)Maximum current at current input (destruction limit) 40 mAWiring of the signal sensors• for voltage measurement• for current measurementas 2-wire transduceras 4-wire transducerusing a 20-pin front connectorsupportedsupported with externalsupplyActuator selection dataOutput ranges (rated values)• Voltage• Current0 V to 10 V0 mA to 20 mALoad impedance (in the rated output range)• For voltage outputs– capacitive load• For current outputs– inductive loadmin. 5 kΩmax. 1 μFmax. 300 Ωmax. 1 mHVoltage output• Short-circuit protection• Short-circuit currentyesmax. 11 mACurrent output• noload voltage max. 15 VDestruction limit against external voltages/currents• Voltage at outputs to MANA• Currentmax. 15 V, continuousmax. 50 mA d.c.Wiring of the actuators• for voltage output2-wire connection4-wire connection (measuring line)using a 20-pin front connectorsupportednot supported