Siemens SIMATIC HMI Operating Instructions Manual

Also see for SIMATIC HMI: Manual Operating instructions Operating instructions Quick install guide Operating instructions

Contents

Mobile Panel 277F IWLANOperating Instructions, 12/2007, A5E01003940-01 35Safety instructions, standards and notes 22.1 Safety instructionsSafety regulationsWARNINGInjury or material damageStrictly observe all instructions in this document at all times. Otherwise, hazardoussituations can arise or the safety functions integrated in the HMI device can be renderedineffective.Observe the safety and accident prevention instructions applicable to your application inaddition to the safety instructions given in this manual.Configuration requirementsWARNINGInjury or material damageThe configuration engineer for a machine or system PLC must take precautions to ensurethat an interrupted program can be restarted normally after communication errors, voltagedips, or power failures.Dangerous operating modes must not occur, not even temporarily, from the entiresequence of the user program up to troubleshooting.Proper useWARNINGCommissioning of the HMI device is forbidden until it has been absolutely ensured that themachine which is to be operated with the HMI device complies with Directive 98/37/EC.