Siemens SAK 51 Installation Instructions Manual

QWeERTYrUIOP}{qwInstallation instructions8AA12722 - E0 - 05/11/2003 - UK - A6E81272280Fig. 1Fig. 2Fig. 31. Product descriptionThe SAK 51 and SAK 52 remote keypads are used to operateand program the central control units. The SAK 52 also has aspeaker and microphone for audio verification.2. Supply packageThe SAK 51 and SAK 52 supply packages contain thefollowing,- One SAK 51 or SAK 52 remote keypad.- One SLK 51/52 language kit with:- installation instructions,- operating instructions,- one plastic front.3. Mounting instructionsThe SAK 51 and SAK 52 are designed for mounting in dryindoor rooms. They must not be exposed to dripping orsplashing water.Avoid touching and spilling any dust on the contact of thekeyboard.3.1 Secure plastic front (fig. 1)1 - Peel back the backing foil Q half way.2 - Place the plastic front W in the recess.3 - Stick down the plastic front in the recess whilst peelingaway the remaining backing foil.3.2 Open housing (fig. 2)1 - Release both locking tabs (A) and remove top section (B).3.3 Product overview (fig. 3)- Q Mounting base,- W Circuit board SMK 51,- E Jumper for the microphone sensitivity,- R Jumper for speaker volume,- T Tamper contact,- Y Jumper for the Buzzer- U Cover of the Keypad,- I Speaker- O Mounting holes,- P Cable inlet,- { Cable clip,- } Back tamper contact screw,- q E-Bus connection,- w Audio connection,- e Potentiometer for LED display,- r Potentiometer for buzzer volume.3.4 Fit housing (fig. 3)1 - Pull the cable through the cable inlet P .2 - Secure the mounting base O using two screws.3 - Use the cable clip { .sLCD Remote keypadSAK 51 / 52SLK 51/52 UKA6E80113520

/ 2

Related manuals for Siemens SAK 51