Menu
Siemens RDJ100 Series Quick Manual
Also see for RDJ100: Operating and installation instructionsProgramming instructionsOperating instructionsOperating and installation instructionsOperating instructions
  |
A6V11239600_en--_a 2018-06-22 Subject to alteration Siemens Building Technologies / HVAC ProductsQuick Guide for Service Interval Reminder Setting RDJ100…Elements Functions1 : Time setting position2 RUN position3 Programming selector4 Advance button (override / presence button)5 Setting knobService interval reminder parameterParameter Description Factory setting Setting rangeSEr Days until next service is dueand boiler service needs tobe arranged.OFF OFF, 1…400 daysPrE Pre-warning time 30 days 0…50 daysAct Action on service due Warning only (0) 0 = Warning only1 = 60 mins control withComfort temperature,manually triggeredThe settings will be kept in the non-volatile memory and will not be erased if removing thebattery or performing a reset on the rear side of the thermostat.Enable service reminder∑ Set programming selector to position .∑ Press advance button for about 5 seconds until thedisplay goes blank. Turn setting knob, screen displaywill be:o 1st line: “SEr”o 2nd line: “OFF”∑ Press advance button once and “OFF” starts flashingand is ready for adjustment.∑ Adjust the days of next service due day (1…400 days)by turning setting knob.∑ Press advance button once to confirm the setting.Note: If service due day is set to “OFF”, thermostat willgo back to normal operation (time setting position ).∑ The display will show:o 1st line: “PrE”o 2nd line: “0d”∑ Adjust pre-warning time to 0…50 days by turningsetting knob.∑ Press advance button once to confirm the setting.∑ The display will show:o 1st line: “Act”o 2nd line: “0”∑ Adjust service interval action by turning setting knob:o 0: warning onlyo 1: 60 mins control with Comfort temperature∑ Press advance button once to confirm setting and goback to normal operation.Set programming selector to RUN position. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved