Siemens LF259RB51 Installation And Use Instructions And Warnings

Also see for iQ700: Instructions for use Operating instructions Installation instructions Installation guide Operating instructions

Contents

ImportAppliances.comTHE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.19Caution! Ensure that kitchen isadequately ventilated. Avoid nakedflames.Clean the operating buttons with amild soapy solution and soft, damp clothonly.Do not use stainless-steel cleaner to cleanthe operating buttons.Stainless Steel surfances: Use a mild non abrasive stainlesssteel cleaner. Clean the surface in the samedirection a sit has been ground andpolished.Aluminium and plastic surfaces: Do not use dry cloths. Use a mild window cleaning agent. Do not use aggressive, acid or causticcleaners.Observe the warranty regulations in theenclosed service booklet.Replacing the light bulbsDefective LED lights must only bereplaced by the manufacturer, theircustomer service department or a licensedtechnician (electrician).If you encounter a problemIf a or appears in the display: See “Filters and Maintenance“Section.If it is not possible to operate theextractor hood: Disconnect the extractor hood fromthe mains electricity supply by pullingout the plug or switching it off at themain fuse box. Wait for approx. 1Minute and then switch it on again.If the lights of the lamps is weak when thehood is in stand-by, then invert the plug(invert phase with neutral).If you have any questions or if a faultoccurs, please call Customer Service.(see list of Customer Servicerepresentatives).When you call please quote the following:E-Nr. FDEnter the relevant numbers into the boxabove. The E-Nr. (Product no.) and FD(Production date) are shown on thenameplace which can be seen inside theextractor hood after the filter frame hasbeen detached.The manufacturer of the extractorhood accepts no liability for complaintswhich can be attributed to the designand layout of the pipework.