Menu
Siemens BV830EN 1 Series Information For Use
Also see for BV830EN 1 Series: Instruction manual
                |
en Drying84. Touch to select the vacuum-sealing level.5. Touch to start the vacuum-sealing process.a The vacuum-sealing process starts. The vacuum-sealing level indicators pulsate in blue one after theother until the selected value has been reached.a The vacuum-sealing process can take up totwo minutes.a The vacuum-sealing level that has been reachedlights up and an audible signal sounds.6. Detach the hose from the container and the externalvacuuming adaptor.Note: If larger bubbles form, cancel the vacuum-sealingprocess. → Page 88.2 Suitable vacuum-sealing containersUse suitable vacuum-sealing containers in order toachieve an optimal result.Only use containers thatare suitable for vacuum-sealing food.Commercially availableproducts are differentwhen it comes to thequality of the food and thematerial.The vacuum hose at-tached to this appliancehas an internal diameterof 3 mm.You may need an adapterfor your container so thatthe hose fits. These ad-aptors are often alreadyincluded with the vacuum-sealing containers.8.3 Cancelling the vacuum-sealing in thecontainer1. To cancel the vacuum-sealing process early, touch.a The appliance displays the vacuum-sealing level un-til it is reached.2. Detach the hose from the container and the externalvacuuming adaptor.9 DryingWhen vacuum-sealing food, the smallest volume of wa-ter gets into the vacuum pump system.This effect is exacerbated when you are vacuum-seal-ing liquids or extremely moist food. For this reason, theappliance comes with a drying function, which furtherremoves any liquid that collects in the pump.¡ If the symbol lights up white, it is advisable to runa drying cycle. However, at this point, you can con-tinue to use the appliance as normal if you wish.¡ If the symbol lights up red, you must run a dryingcycle.9.1 Starting dryingNote: You can close the vacuum-sealing drawer whiledrying is in progress.1. Tightly close the glass lid and hold it there.2. Touch .a The drying starts and takes between 5 and 20minutes.a During the procedure, pulsates in blue.a At the end of the process, the compartment is ventil-ated and an audible signal sounds.a You can now open the glass lid.3. Note: Occasionally, a single drying procedure is notsufficient. If, after one drying procedure, andred light up, there is still moisture in the pumpsystem.Wait until goes out.4. Restart the drying process.10 Cleaning and servicingTo keep your appliance working efficiently for a longtime, it is important to clean and maintain it carefully.10.1 Cleaning productsYou can obtain suitable cleaning products from after-sales service or the online shop.ATTENTION!Unsuitable cleaning products may damage the sur-faces of the appliance.▶ Do not use harsh or abrasive detergents.▶ Do not use cleaning products with a high alcoholcontent.▶ Do not use hard scouring pads or cleaningsponges.▶ Do not use any special cleaners for cleaning the ap-pliance while it is hot.▶ Only use glass cleaners, glass scrapers or stainlesssteel care products if recommended in the cleaninginstructions for the relevant part.▶ Wash sponge cloths thoroughly before use.10.2 Cleaning the applianceWARNING ‒ Risk of burns!The heat-sealing bar in the vacuum-sealing compart-ment becomes extremely hot if the appliance is usedfrequently and there are long heat-sealing times.▶ Never touch the hot heat-sealing bar.▶ Keep children at a safe distance. |
Related manuals for Siemens BV830EN 1 Series
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved