OPERATION_________________________________________________________________________________________________________6-4COM-00-21-04 OCTOBER 2021Version No.: A.1This is a small sample of the many CLI capabilities and their use. For further detail, pleasereference the BS5000 and Cobalt-Plus CLI Operations and Configuration Manual for yoursoftware version.6.3 Remote Station (Cobalt) CLI OperationThe basic functionality of Cobalt software operating on a remote radio can be determined fromthe LCD screen. The LCD displays the state of the remote station by cycled through its statusscreens. It shows “scanning“, when it is searching for a base station and “connected” withoperational details when it is connected to the base station shown in Figure 6-8.Figure 6-8 Remote Station Connection Process LCD ScreensFurther operational information can be obtained via the CLI as described in this section.