Siemens A80672 Installation & Operation Manual
WEB USER INTERFACE (WEBUI)_______________________________________________________________________________________________________________4-23SIG-00-13-12 February 2021Version No.: B• SNMP TrapsSNMP messages sent from the PTC Console are received in the Back Office. The CDL program defines whichalarms are sent.Table 4-1 SNMP InformationSNMP OID VALUE DESCRIPTIONdeviceType.0 iVIUDefines the type of equipment that sent theSNMP trap. For the PTC Console, this fieldwill always contain “iVIU”dateTime.0 03-May-2012 18:56:13 Date and Time the system created the alertsiteName.0 CP_Safetran_312 This field contains the Site Name, as set inthe PTC Console configuration settings.milePost.0 35.2This field contains the Milepost Number, asset in the PTC Console configurationsettingsspareText2.0 Not used. Reserved for future use.spareText1.0 2950240fd20218 Not used. Reserved for future use.alarmPriority.0 4The priority of the alarm as set by the iVIU’sCDL logic. This value is specific to eachalert (see the manual for the specific CDLprogram).alarmClearFlag.0 0 Indicates whether this is the alarm or thecorresponding clear for the alarm.alarmText.0 Alarm Enabled MessageThe Alarm text as programmed into CDLlogic. This value is specific to each alert(see the manual for the specific CDLprogram).alarmID.0 2The Alarm ID number as programmed in theCDL logic. This value is specific to eachalert (see the manual for the specific CDLprogram).trapNum.0 3The Trap Number as programmed in theCDL logic. This value is specific to eachalert (see the manual for the specific CDLprogram).snmpTrapOID.0 1.3.6.1.4.1.3064.3.20.2.2The ID of the trap in the unit’s MIB. Thisvalue is specific to each alert (see themanual for the specific CDL program).sysUpTime.0 1days22h55m24.59s System Up Time |
Related manuals for Siemens A80672
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved