INSTALLATION AND CONFIGURATION_______________________________________________________________________________________________________________3-6SIG-00-13-12 February 2021Version No.: B3.2 CONSOLE INSTALLATIONThe PTC Console is mounted to the relay rack assembly using the optional mounting bracket. The PTC Consolehas four #8 threaded mounting holes on the rear of the unit.3.2.1 Installing Mounting Bracket to ConsoleUse the following procedure to install the optional Mounting Bracket to the PTC Console:1. Position the mounting bracket with the counter sunk holes facing away from the console.2. Mount the bracket to the PTC Console using four #8 flat head screws as shown in Figure 3-6.Figure 3-6 Installing PTC Console Mounting Bracket

Siemens A80672 Installation & Operation Manual

Product

Learn More

Legal