Siemens 2000592-001 User Manual

DataNET Troubleshooting Guide, ContinuedConfigurationParameter ErrorsThe device may have an invalid or duplicate IP address, Subnet mask oriproute. Each ANCB must have a unique IP address. Verify theconfiguration parameters by connecting a PC serial port to theConfiguration Port, Logging in and typing config display.local> config displayConfig:Device ANCB_DNaddress ip 172.16.9.239netmask 255.255.0.0address ethernet 00.c0.c9.00.d2.3biproute 0.0.0.0time server ip 0.0.0.0port1 DataNET Copperport2 DataNET CopperDevice ID The ANCB/DN device id is automatically assigned and is not userconfigurable as it is on the DataNET Hub. Th ANCB/DN device ID isautomatically set to the board IP address at power up or reset. :Broadcast StatusInformationThe Advance Network device periodically broadcast their status fordiagnostic and network routing purposes.2000592-001 Troubleshooting • 53