Sharp XG-MB70X Setup Manual

Contents

MODELXG-MB70XMULTIMEDIA PROJECTORSETUP GUIDEScreen Size and Projection Distance ................ 2Connecting Pin Assignments ............................. 3RS-232C Specifications and Commands .......... 4Setting up the Projector Network Environment ... 61. Connecting the Projector to a Computer ........... 72. Setting an IP Address for the Computer ............ 83. Setting up a Network Connection for the Projector .. 10Controlling the Projecter via LAN .................... 12Controlling the Projector Using Internet Explorer(Version 5.0 or later) ................................... 12Confirming the Projector Status (Status) ............. 13Controlling the Projector (Control) ....................... 13Setting and Adjusting the Projector(Setting & Adjustment) ............................... 14Setting the Security (Network – Security) ............ 14Making General Settings for the Network(Network – General) .................................. 15Setting for Sending E-mail when an Error Occurs(Mail – Originator) ..................................... 15Setting Error Items and Destination Addressesto which E-mail is to be Sent when anError Occurs (Mail – Recipient Setting) ..... 16Setting the Projector Using RS-232C or Telnet ...... 17When Connecting Using RS-232C ....................... 17When Connecting Using Telnet ............................ 18SETUP MENU (Main Menu) ................................. 19ADVANCED SETUP MENU ................................. 19Controlling the Projector Using RS-232C or Telnet ...... 20View Setting Detail List ([V]View All Setting) ....... 20Set Items ............................................................... 20Save Settings and Quit ([S]Save & Quit) ............. 21Quit without Saving Settings ([Q]Quit Unchanged) .. 21IP Address Setting ([1]IP Address) ....................... 22Subnet Mask Setting ([2]Subnet Mask) ............... 22Default Gateway Setting ([3]Default Gateway) .... 22User Name Setting ([4]User Name) ..................... 23Password Setting ([5]Password) .......................... 23RS-232C Baud Rate Setting([6]RS-232C Baud Rate) ............................ 23Projector Name Setting ([7]Projector Name) ....... 23Disconnecting All Connections([D]Disconnect All) ...................................... 24Entering ADVANCED SETUP MENU([A]Advanced Setup) .................................. 24Setting Auto Logout Time(ADVANCED[1]Auto Logout Time) ............. 24Data Port Setting (ADVANCED[2]Data Port) ....... 24Carrying out Network Ping Test(ADVANCED[5]Network Ping Test) ............ 25Setting of Accept IP Address (ADVANCED[6]AcceptIP Addr(1) – [8]Accept IP Addr(3)) ................. 25Accepting All IP Addresses(ADVANCED[9]Accept All IP Addr) ............ 25Setting of Search Port(ADVANCED[0]Search Port) ...................... 26Return to Default Settings(ADVANCED[!]Restore Default Setting) ............ 26Return to Main Menu(ADVANCED[Q]Return to Main Menu) .............. 26Troubleshooting ................................................. 27Dimensions ........................................................ 30