Sharp XG-MB70X Setup Manual

Contents

-6Page 71. Connecting the projector to a computerSetting up the Projector Network EnvironmentThis section describes the basic procedure for using the projector via the network.If the network is already constructed, the projector’s network settings may need to be changed. Pleaseconsult your network administrator for assistance with these settings.Connect a LAN cable (category 5, cross-over type) between the computer and projector.Pages 8, 92. Setting an IP address for the computerAdjust the IP settings of the computer to enable one-to-one communications with the projector.Page 103. Setting up a network connection for the projectorAdjust the projector network settings to conform to your network.LAN cable(commercially available)Use Internet Explorer(version 5.0 or later)to make variousprojector settings.Temporarily changethe computer’s IPaddress.• Microsoft ® and Windows ® are registered trademarks of Microsoft Corporation in the United States and/orother countries.• All other company or product names are trademarks or registered trademarks of their respective compa-nies.