Sending a Fax by Automatic Dialing934. SendingFaxes1 Load the document(s).• If desired, press to set theresolution and/or contrast.2 Press once. appears in the display, followed by the lastnumber dialed. Make sure the number that appears is the number youwish to dial.3 Press . Dialing begins.RESOLUTION/RECEPTION MODESTART/MEMORYRedialYou can automatically redial the last number dialed on the fax machine.Note: The fax machine and the cordless handset each retain their ownseparate redial numbers.Automatic redialingIf you use automatic dialing (including Direct Keypad Dialing) to send a faxand the line is busy, the fax machine will automatically redial the number. Thefax machine will make three redial attempts at intervals of five minutes. Duringthis time, RECALLING will appear in the display, followed by a two-digitnumber assigned to the fax job. You will not be able to dial any other locationswhile the message appears.Note: If a fax transmission is unsuccessful and DOCUMENT JAMMEDappears in the display, remove the document as explained on page 137. (Thismay occur if the other fax machine doesn’t respond properly when youattempt to send the document.)
