Messages and Signals13310. Trouble-shootingMEMORY PRINTING The machine is preparing to or printing out adocument from memory.NO DATA This appears if you attempt to search for an auto-dialnumber when none have been stored.OFF HOOK This appears if you forgot to replace the handset afterusing it to dial and send a fax. Replace the handset orpress the STOP key to clear the message.SPEAKER PHONE The SPEAKER key has been pressed and themachine is waiting for you to dial. You can dial andspeak to the other party without picking up thehandset (speak toward “MIC” on the operation panel).OVER HEAT The print head has overheated. Operation can becontinued after it cools. If overheating frequentlyoccurs, try changing the print contrast setting toLIGHT (see page 29).PRINT HEAD FAIL/YOU NEED SERVICE(alternating messages)The print head has failed and requires service.READY TO SEND A document has been loaded and the machine iswaiting for you to begin faxing or copying.RECALLING This appears if you attempt to send a fax byautomatic dialing and the line is busy or the receivingfax machine does not answer. Your machine willautomatically reattempt the call. (SeeAutomaticredialing on page 93.)REPLACE HANDSET If this message appears, replace the handset.T.A.D. TRANSFER The answering system's transfer function has beenturned on (see page 73).TOTAL MSGS:XX This indicates that you have received messages inthe answering system. “XX” is the number ofmessages.TOTAL PAGE(S) 01 Number of pages transmitted, received, or copied.
