Sharp PN-V600A Operation Manual

Also see for PN-V600A: Brochure & specs Setup manual Setup manual

50E 50■ NETWORK (GENERAL)This screen allows you to specify the general LAN settings.MONITOR NAMESpecify a name for this monitor as it should appear on theInternet Explorer screen.AUTO LOGOUT TIMESpecify the time (in minutes) to elapse before automaticallydisconnecting this monitor from the network.Specify in minutes from 1 to 65535. A value of ‘0’ will disablethis function.DATA PORTSpecify the TCP port number to use for exchanging data withthe monitor.Specify a value from 1025 to 65535.SEARCH PORTSpecify the port number to use when searching for thismonitor.Specify a value from 1025 to 65535.INSTALLATION INFORMATION (NAME/LOCATION)Specify the information to display for this monitor in theInternet Explorer window.TIPS• The MONITOR NAME can be up to 16 alphanumericcharacters or symbols.• Enter up to 50 characters in the NAME field in theINSTALLATION INFORMATION.• Enter up to 100 characters in the LOCATION field in theINSTALLATION INFORMATION.■ MAIL (ORIGINATOR)This screen allows you to configure the e-mail sent periodicallyor when the monitor has an error.The settings depend on the configuration of your LAN. Askyour LAN administrator for details.SMTP SERVERSpecify the SMTP server address for sending e-mail.* When using a domain name, make sure to specify theDNS SERVER as well. (See page 49.)ORIGINATOR E-MAIL ADDRESSSpecify the e-mail address for this monitor.This address becomes the e-mail address of the originator.ORIGINATOR NAMESpecify the name for the originator.This name appears in the “Originator Name” field of thee-mail.AUTHENTICATIONSpecify the authentication method to use when sendinge-mail.POP SERVERIf the “AUTHENTICATION” method is “POP before SMTP”,specify the POP server address.ACCOUNT NAME / PASSWORDIf the “AUTHENTICATION” method is “POP before SMTP”,specify the account name and password to connect to thePOP server.TIPS• You can enter up to 64 alphanumeric characters or symbolsfor the ORIGINATOR E-MAIL ADDRESS, ORIGINATORNAME, ACCOUNT NAME, and PASSWORD.• The SMTP SERVER and POP SERVER can be up to 64characters.The following characters can be used: a-z, A-Z, 0-9, - , .Controlling the Monitor with a PC (LAN)