Menu
Sharp PG-C30XA Operation Manual
                                                                |
29OperationComputer Image Adjustments (INPUT 1 or 2 mode Only)Adjusting the Computer ImageWhen displaying computer patterns which are verydetailed (tiling, vertical stripes, etc.), interference mayoccur between the LCD pixels, causing flickering,vertical stripes, or contrast irregularities in portions ofthe screen. Should this occur, adjust “Clock”, “Phase”,“H-Pos” and “V-Pos” for the optimum computer image.• Computer image adjustments can be made easily bypressing AUTO SYNC ( ). See page 32 for details.(GUI) On-screen Display2, 3, 41, 5ProjectorAdjusts vertical noise.Adjusts horizontal noise (similar to tracking on your VCR).Centres the on-screen image by moving it to the left or right.Centres the on-screen image by moving it up or down.ClockPhaseH-PosV-PosDescription of Adjustment Items( Select the desired computer input mode with INPUT.)(Slide the MOUSE/ADJUSTMENT switchon the remote control to the ADJ. position.)1 Press MENU. Menu bar and “Picture” menuscreen appear. GUI operation guide is alsodisplayed.2 Press ß/© to select “Fine Sync”.3 Press ∂/ƒ to select a specific adjustment item.4 Press ß/© to move the mark of the selectedadjustment item to the desired setting.5 To exit from the GUI, press MENU.• To reset all adjustment items, select “Reset” on the “FineSync” menu screen and press ENTER.23DescriptionSelected itemMOUSE ADJ.Remote control |
Related manuals for Sharp PG-C30XA
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved