Menu
Sharp PA-VR5E Operation Manual
Also see for PA-VR10E: Operation manual
                                   | |
224 Press the OK button to confirm the displayed hour.The “minutes” setting then starts flashing.5 Press the (+) or (-) cursor button toselect the minutes.6 Press the OK button to confirm the displayed minutes.The “hour” setting for the end time thenstarts flashing. Use the same procedure toselect the hour and minute settings for theend time.7 After you have confirmed the “minutes” setting, press theOK button.This completes the time setting procedure and returns you tothe menu screen.TipPress the 1 cursor button to go to the preceding setting. Press the0 cursor button to go to the next setting.• Recording begins slightly before the scheduled recording time.• Settings such as the recording mode and microphone sensitivityused for scheduled recording are those that were set beforerecording begins.• If the scheduled time is reached while you are playing arecording, playback stops and the recorder starts recording.• If the scheduled time is reached while the digital voice recorderis connected to a personal computer, a flashing indicationappears on the display and recording does not take place.To cancel the settings1 Display the recording scheduler settings screen. (See steps 1and 2 on page 21.)2 Press the ERASE button.“DEL.?” appears on the display.3 Press the OK button.“DELETE!” appears and the settings are deleted.Message alarm functionThis function enables the recorder to play a pre-recorded message orsound an alarm tone at a set time. You can set up to 3 alarms at onetime. |
Related manuals for Sharp PA-VR10E
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved