Sharp IM-DR410H Operation Manual

E-30IM-DR410HENGLISH03/7/21 IM-DR410H_SEEG_E.fmIM-DR410H TINSZ0960AWZZAdvanced Features-Titling a MiniDisc-Master MiniDisc operation Operation of the MiniDisc for stampingNote:If the total number of tracks on the master MiniDisc doesnot match that on the MiniDisc for stamping, the unit willdisplay "Can'tSTAMP" and turn off.If this happens, adjust the total number of tracks on thenewly recorded MiniDisc using the edit operation.1 Insert a master MiniDisc.Do not mistake the master MiniDisc for the target one.2 Whilst in the stop mode, press the MENU/ENTER but-ton.3 Press the or button repeatedly to select "EDIT".4 Press the MENU/ENTER button.5 Press the or buttonrepeatedly to select "NAMESTAMP".6 Press the MENU/ENTERbutton.To cancel the operation, press the :OFF/HOLD button.7 Press the MENU/ENTER button.8 When the unit displays "CHANGE MD", remove themaster MiniDisc.Remove it without turning off the power. Or, the operationwill be cancelled.9 Load a MiniDisc for stamping.10 Press the MENU/ENTER button.The unit will finish recording the character information andenter the stop mode.