Sharp IM-DR410H Operation Manual

E-29IM-DR410HENGLISH03/7/21 IM-DR410H_SEEG_E.fmIM-DR410H TINSZ0960AWZZAdvanced Features-Titling a MiniDisc-Titling a MiniDisc (continued)! To add characters ! Stamping titles from another MiniDiscBefore stampingWhen there are 2 MiniDiscs on which the same tracksare recorded, you can transfer the character information(disc and track names) of the master MiniDisc to anotherMiniDisc (for stamping).1 Put the unit in the character input mode.(Perform steps 1 - 5 on page 27.)2 Press the VOL + or VOL - button to move the cur-sor to the character before which you want to adda new character.3 Select the character to add.(Perform steps 6 - 8 on page 27.)4 Press and hold down the MENU/ENTER button for2 seconds or more." "TOC" will be displayed. To write the updated con-tents to the MiniDisc, press the :OFF/HOLD but-ton." You cannot remove the MiniDisc whilst "TOC" isdisplayed. "TOC" will not disappear until the re-corded contents have been updated.1. What is a master MiniDisc?A recordable MiniDisc that contains tracks and charac-ter information. (You cannot transfer the informationfrom a playback-only MiniDisc.)2. What is a MiniDisc for stamping?A MiniDisc that contains the same tracks in the same or-der as the master MiniDisc. (Make sure that the totalnumber of tracks of the master MiniDisc and the one forstamping are the same.)