Sending a Fax by Automatic Dialing66Error Correction ModeThe fax machine is set to automatically correct any distortions in atransmission due to noise on the telephone line before printing at thereceiving end. This function is called Error Correction Mode (ECM).ECM is effective for both transmissions and receptions, and is onlyeffective when the other fax machine has ECM as well.If desired, you can turn ECM off. This will increase slightly theamount of memory available for memory transmission and reception.1 Press these keys:The display will show:ECM MODE2 Press 1 to turn on ECM or 2 to turn itoff.3 Press the STOP key to return to thedate and time display.orYES NO4FUNCTION1 2STOPall-ux510A.book Page 66 Thursday, September 14, 2000 9:05 AM
