Sharp DV-NC100X Service Manual

Also see for DV-NC100X: Operation manual

1-4-4 DVD_NOTE2Instructions for HandlingSemi-conductorsElectrostatic breakdown of the semi-conductors mayoccur due to a potential difference caused by electrostaticcharge during unpacking or repair work.1. Ground for Human BodyBe sure to wear a grounding band (1MΩ) that is properlygrounded to remove any static electricity that may becharged on the body.2. Ground for WorkbenchBe sure to place a conductive sheet or copper plate withproper grounding (1MΩ) on the workbench or othersurface, where the semi-conductors are to be placed.Because the static electricity charge on clothing will notescape through the body grounding band, be careful toavoid contacting semi-conductors with your clothing.CBA< Incorrect >CBAGrounding BandConductive Sheet orCopper Plate< Correct >