23A42430, SCA/SCNZ R980J/990J(S) O/MDisplayStep Procedure Pad OrderPress the number 4 pad.Press the INSTANT COOK/START pad.Thenwill appear repeatedly.Cooking operations can now be demonstrated with no power in the oven.* Suppose you demonstrate Instant Cook.23DisplayStep Procedure Pad OrderPress the INSTANT COOK/START pad.(Within one minute of closingthe door.) The timer begins to count down to zero at tentimes the speed. When the timer reacheszero, will appear in the display.1DisplayStep Procedure Pad OrderPress the STOP/CLEAR pad.The time of day will appear in the display.* To cancel the Demonstration Mode. After step 2 above.3DisplayStep Procedure Pad OrderPress the MULTI COOK pad.2The guide message will be repeated twice, and then the display will show the time of day.If you want to cancel the guide, press the STOP/CLEAR pad.NOTE: For SENSOR INSTANT ACTION, HELP is not lit in the display, so press the HELP pad before pressingthe desired SENSOR INSTANT ACTION pad.Demonstration ModeThis feature is mainly for use by retail outlets, and also allows you to practice key operations.* To demonstrate. After step 1 for Auto Start.Each pad carries useful guide.* To get the guide for MULTI COOK pad. After step 1 for Auto Start.Info on PadsEach setting of Automatic Operations has a cooking hint.If you wish to check, press the HELP pad whenever HELP is lit in the display.Help4MULTICOOKSTOPCLEARINSTANT COOKSTARTINSTANT COOKSTARTSCA/SCNZ R980J14-26 04.5.21, 11:28 AM23