Sharp CD-BK147V Operation Manual

Also see for CD-BK147V: Operation manual

E-30CD-BK147V(S)E3.fm01/9/28ENGLISHCD-BK147VTape Recording- Recording to a cassette tape -Recording to a cassette tapeBefore recording:z When recording important selections, make a preliminary test to ensure that thedesired material is properly recorded.z SHARP is not liable for damage or loss of your recording arising from malfunctionof this unit.z The volume and sound controls can be adjusted with no effect on the recordedsignal (Variable Sound Monitor).z For recording, use only normal tapes. Do not use metal or CrO tapes.Recording can be operated in the TAPE 2 compartment. The TAPE 1 is for playbackonly.Ñ Recording from a CD (CDs)You can record 3 CDs continuously.To perform programmed recording:To stop recording:Press the ( /RETURN) button.The CD and tape will stop.Note:When the end of the tape is reached whilst recording, the CD player will display thetrack number which was being played at that time, and stop automatically. If you wantto restart recording from the beginning of the interrupted track, turn over the tape,press the REC PAUSE [ (TAPE)] button and then the / ( /SELECT/RESUME) button. (If tracks have been stored in memory using the programmedrecording, recording will restart from the first track stored in memory.)1 Press the ON/STAND-BY button to turn the power on.2 Load a cassette into the TAPE 2 cassette compartment with theside to be recorded on facing you.Wind past the leader of the tape, on which recording cannot be performed.3 Press the CD/VIDEO CD (CD) button and load the desired disc.4 Press the DISC SKIP button to select the disc to be recorded first.5 Press the REC PAUSE [(TAPE)] button.Recording will be paused.6 Press the / ( /SELECT/RESUME) button to start recording.z CD playback will start approximately 7 seconds after the tape starts.z Recording is started from the selected CD. When the playback of the last discis finished or the end of the tape is reached, the CD and the cassette will stopautomatically.1 Programme discs and tracks. (See page 19.)2 Press the REC PAUSE [ (TAPE)] button.3 Press the / ( /SELECT/RESUME) button.Programmed play (See page 19.)Downloaded from: http://www.usersmanualguide.com/