Sharp AJ-6000 Operation Manual

Contents

31COPYINGIn this chapter, you will learn a variety of copying operations.NORMAL COPYING1 Make sure that the power is on.Make sure that the supplied power code is plugged into a power source. (Seepage 11) The unit will automatically turn on the power when it is plugged into apower source. If the power code is plugged into a power source and the unit is stilloff, press the "POWER" button ( ) to turn on the unit.When the unit is turned on, the following messages and values will appear on thedisplay panel, and the unit will be enabled.2 Load the original.Loading an original1) Open the original cover, and load the original.When loading the original, place the original face down on the original table andfit to the scale size shown on the original table.Ready to Copy100% A4 0Warming up100% A4 0Place the original face downon the original table.Align the corner of the original with the ( ) mark.