75Optional Settings for Sending Faxes3. SendingFaxesError Correction ModeThe fax machine is set to automatically correct any distortions in atransmission due to noise on the telephone line before printing at thereceiving end. This function is called Error Correction Mode (ECM).ECM is effective for both transmissions and receptions, and is onlyeffective when the other fax machine has ECM as well.If desired, you can turn ECM off. This will slightly increase theamount of memory available for memory transmission and reception.1 Press these keys:The display will show:2 Press 1 to turn on ECM or 2 to turn itoff.3 Press the STOP key to return to thedate and time display.orYES NO1 2STOPECM MODE1=YES, 2=NOFUNCTION4 0Retransmission times (for memory transmission)If a line error or power failure occurs during transmission frommemory, your fax will automatically redial the number and attempt tocomplete the transmission. Retransmission will begin from the pagethat was being transmitted when the error occurred.Your fax has been set at the factory to make 2 attempts at memoryretransmission. If you wish to change the number of attempts, followthese steps:7
