Sharp 32FG2EA Quick Start Manual

ENWhat is included in the boxSupply of this TV includes following parts:• 1x TV • 1x TV stand installation packet• 1x Remote control • 1x Quick Start Guide• 2x AAA batteriesAttaching the StandPlease follow the instructions on last page of this user manual.Wall mounting the TV1. Remove the four screws that are supplied in the wall mounting holes.2. The wall mount can now be easily attached to the mounting holes onthe rear of the TV.3. Install the wall mounting bracket to the television as advised by thebracket manufacturer.ConnectionsConnecting external devices see last page in this IM.Getting started - initial set up1. If rubber parts, foam parts or tape are attached to the TV frame, pleaseremove them gently.2. Using the antenna cable (not supplied), connect the TV to the antennawall socket.3. For connecting to the Internet with a wired connection connect aCat 5/Ethernet cable (not included) from the TV to your broadbandmodem/router.4. Insert the batteries supplied into the Remote control.5. Connect the power cable to the Electrical outlet.6. Then press Standby button to power on TV.7. After turning the TV on, you will be welcomed by the First TimeInstallation menu.8. Please select language for TV menu.9. Please set desired settings in remaining screens of First installationmenu.TV Control Stick*TV control stick is located on the lower left corner of back side of the TV.You can use it instead of remote control to control most of the functionsof your TV.While TV is in standby mode:• short press of control stick - Power OnWhile watching TV:• RIGHT/LEFT – volume up/volume down• UP/DOWN – changes channel up/down• short press – Displays Menu• long press – Standby Power OffWhile in menu:• RIGHT/LEFT/UP/DOWN – navigation of cursor in on-screen menus• short press – OK/Confi rm selected item* - for TV with control stickChoosing Mode Input/SourceTo switch between the different input/connections.a) Using the buttons on the remote control:1. Press [SOURCE/ ] - The source menu will appear.2. Press [▲] or [▼] to select the input you require.3. Press [OK].b) Using the TV control stick*:1. Shortly press control stick to enter menu.2. Press control stick down and navigate cursor to SOURCES menu.3. Shortly press control stick to enter SOURCES menu.4. With control stick choose the input/source you require.5. By short press of control stick, you will change input/source to theone selected.* - optionalTV Menu navigationUse the (▲/▼/◄/►) buttons to focus on the desired item.Press the OK button to select the item currently in focus.Press the /BACK button to go back one step in the menu.Press the / HOME button to enter TV Home menu.To enter Live TV menu, press the TV button and then press the/ MENU button.USB Media playback noticeThis TV supports playback of a wide variety of fi le types from a USB drive.However, for data security reasons, Google limit the supported fi le systemtypes.To playback any media from a USB storage drive, the USB drive mustbe formatted to a FAT16 or FAT32 file system. NTFS is not supported.Electronic instruction manualFind more useful information directly from your TV.To launch the online manual, press the / HOME button, select Appsfrom the Home menu, and select "Instruction Manual" from the appslist.NOTE: An Internet connection is required to use this electronic manual.Remote controlSee in On Screen Manual in TV3