Sealey VS8199 Instructions Manual

instructions forvideo borescope Ø8mm probemodel no: vs8199Thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to theseinstructions, and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. safeTy9 Always perform automotive testing in a safe environment.9 Keep your work area clean and well lit.9 Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.9 operate the tool in a well-ventilated work area.8 do noT operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.8 do noT use the tool around corrosive chemicals which can damage the tool.8 do noT abuse the flexible cable. Never use the flexible cable to carry the tool.8 do noT drop the borescope, it is not shock proof.9 Keep bystanders and children away while operating the tool.9 Keep the tool dry, clean, free from oil, water and grease. use a small amount of mild detergent on a clean cloth to clean the outsideof the tool when necessary and store in a dry, childproof area.9 Turn the borescope off when not in use.9 Remove the batteries when cleaning the unit or before storing the unit for a long period of time.9 When necessary replace all four batteries. Use only the size and type of battery specified.2. inTroducTionfitted with a 60mm screen and includes controls for light intensity, contrast, mirror flip function (to reverse image when using a 45 o mirror) andimage rotation. Features waterproof probe pod with IP67 rating and supplied with AV-out cable. Powered by 4xAA batteries (supplied).3. specificaTionmodel no................................................................... VS8199camera Ø ...................................................................... 8mmfield of Vision ...................................................................48oPod length................................................................... 46mmcamera Probe Length ................................................ 980mmAdjustable Light Control ................................................... Yesscreen Size .................................................................. 60mmscreen resoltion ...................................................... 640x480mirror flip/rotate function ............................................... YesAV Out.............................................................................. YesAccessories ..............................45° Mirror, Magnetic Pick-Up,................................................................. Hookx2, AV CablePower source ............................................... 4xAA (supplied)4. operaTion4.1. install batterries.4.1.1. Remove battery cover from back of borescope.4.1.2. Insert 4xAA batterries into battery compartment.4.1.3. ensure they are positioned with the correct orientationas shown inside the compartment.4.1.4. Replace the battery cover.VS8199 | Issue 1 18/10/16Original Language Version© Jack sealey limitedrefer toinstructionsfig.1

/ 2

Related manuals for Sealey VS8199