Sealey SPB80T.V2 Quick Start Manual

80kg tow behind broadcast spreadermODEL NO: spb80t.V2thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.iMportant: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. saFetY9 Ensure that the spreader is in sound condition and good working order before use.9 Ensure that the operator is fully trained and competent to operate the prime mover before attaching and using the spreader.9 Ensure that all chemical safety instructions are adhered to when handling products for use in the spreader. A full range of personal safetyequipment is available from your Sealey stockist.9 Always distribute the load evenly.9 Ensure all non essential personnel keep a safe distance when the spreader is in use.9 Replace or repair damaged parts. Use only recommended parts. Unauthorised parts may be dangerous and will invalidate the warranty.9 Keep hands and feet away from moving parts.8 do not overload the spreader - see Specification.8 do not leave unattended, especially when loaded, unless the wheels are chocked or the spreader is otherwise secured.8 do not allow anyone to ride on the spreader.8 do not allow untrained personnel to use the spreader. do not allow children to use the spreader.8 do not use the spreader for purposes other than for which it is designed.8 do not operate the spreader when you are tired or under the influence of alcohol, drugs or intoxicating medicines.9 When loaded, do not operate the spreader over edges, rough surfaces etc. where the spreader is at risk of overturning. warning! Failure to comply with these instructions may result in damage to spreader or other property and/or personal injury.2. introductionmanufactured with a strong tubular steel frame and polypropylene dispensing hopper. Pin hitch design attaches to ride-on lawnmowers, can beconverted to ball hitch using model No. TB36*. Fitted with aluminium gear, rain cover, pneumatic tyres and adjustable feed system. Includeshopper screen to ease spreader flow and filter out unwanted contaminants. Sprays in 360° motion to cover a large area. Suitable for a variety ofhorticultural agents including grit, seed, salt, fertilizer and weed killer.* Some modification may be required3. speciFicationmodel no ..............................................................SPB80T.V2Capacity (volume) ............................................................ 88LDimensions (W x D x H) ........................880 x 1350 x 965mmSpread ........................................................................ 3-3.6m4. contentsOriginal Language Version© Jack Sealey LimitedRefer toinstructionmanualSPB80T.V2 | Issue:1 11/11/19

/ 5

Related manuals for Sealey SPB80T.V2