Sealey Power Tools SA651.V3 Instructions Manual

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructionsand properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICHIT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE OR PERSONAL INJURY AND WILL INVALIDATE THEWARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.1. SAFETY INSTRUCTIONS Follow all workshop safety rules, regulations, and conditions when using the tyre buffer. WARNING! Disconnect from air supply before changing accessories or servicing. Maintain the tyre buffer in good condition and replace any damaged or worn parts.Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty. WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi. Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each useand ensure that all connections are secure. Wear approved safety eye/face shield, ear defenders, and hand protection. Only use tyre buffer cones which are specifically designed for use with this tyre buffer. Ensure tyre is adequately secured before using the tyre buffer. Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes. Keep children and non essential persons away from the working area. DO NOT use the tyre buffer for a task it is not designed to perform. WARNING! DO NOT use the tyre buffer if it is damaged, or if its thought to be faulty. (ContactService Agent). DO NOT use the tyre buffer unless you have been instructed in its use by a qualified person. DO NOT carry the tyre buffer by the air hose, or yank the hose from the air supply. DO NOT operate the tyre buffer if you are tired or under the influence of alcohol, drugs orintoxicating medication. DO NOT carry the tyre buffer with your hand on the power trigger, in order to avoidunintentional starting. DO NOT direct air from the air hose at yourself, others or animals. When not in use, disconnect from the air supply, clean and store in a safe, dry, childprooflocation.INSTRUCTIONS FOR:AIR TYRE BUFFER PREMIERMODEL No: SA651.V32. INTRODUCTION & SPECIFICATIONFree speed: . . . . . . . . . . . . . . . 2500rpmAir consumption:. . . . . . . . . . . . . . 4cfmOperating air pressure:. . . . . . . . . .90psiAir inlet size: . . . . . . . . . . . . . . . .¼” BSPSound power: . . . . . . . . . . . . . . .87dB.AWeight: . . . . . . . . . . . . . . . . . . . . . 1.1kgComposite cover moulded around lightweight aluminium alloy housing reduces effects of chill onoperator’s hands and provides added control. Air motor with quality bearings for smooth andpowerful operation. Exhaust outlet adjusts 360° keeping air flow away from operator. Ideal forbuffing / roughing area of tyre to be repaired. Suitable for professional workshop.Specifications:Original Language Version SA651.V3 Issue: 1 - 20/10/11

/ 3

Related manuals for Sealey Power Tools SA651.V3