Sealey LED021 Manual

Aluminium mAgnetic Flexi-HeAd ligHt270lm OsrAm P8 ledModel no: led021thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to theseinstructions, and properly maintained, give you years of trouble free performance.imPOrtAnt: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. sAFety1.1. generAl8 dO nOt shine directly into your, another person’s or an animal’s eyes.8 dO nOt allow children to use the torch.8 dO nOt use the torch if you suspect that the battery or the torch casing is damaged.8 dO nOt leave batteries in a discharged state. Before storage remove batteries.1.2. BAttery sAFety WArning! To reduce the risk of burns or fire:8 dO nOt attempt to open the batteries.8 dO nOt crush, puncture, short contacts or dispose of in fire or water.8 dO nOt expose to temperatures above 60°C (140°F).9 Replace only with the batteries designed for this product.9 Recycle or dispose of used batteries as stipulated by local regulation.9 If the electrolyte in the batteries gets on your skin, rinse thoroughly with water. If it gets in your eyes, rinse thoroughly with cool waterand seek immediate medical attention.2. intrOductiOnosram P8 LED produces 270 lumens. Flexible head bends and holds position to allow bright illumination in confined spaces. Adjustable focusfrom spotlight to wide area by a push/pull action of the head. Features a magnet in the end for hands free use. Powered by 3 x AAA batteries(not supplied).3. sPeciFicAtiOnModel no: ................................................................. led021Battery: ............................... 3 x AAA Batteries (Not Included)led Qty: ........................................................ osram P8 ledlumen output: ............................................................. 270lmnett Weight: ................................................................... 262goperating Time: .............................................................. 4hrsRange: .......................................................................... 100m4. OPerAtiOn4.1. Unscrew the bottom of the body of pen light to load 1.5vAAA battery with “+” polarity inward.4.2. Replace the end cap on bottom of pen light.4.3. Press the button at the top of the body to turn XPe led on(fig.2).4.4. Press again to turn XPE LED off (fig.2).4.5. To change the width of the beam, slide the lens backwards andforwards to adjust from a wide beam to a focused beam (fig.1).5. mAintenAnce5.1. Keep the torch clean by wiping with a damp cloth.5.2. Remove batteries if not being used for a long period of time.5.3. Store torch and batteries in a dry childproof area.On/Offfig.1fig.2led021 Issue 1 28/01/19Original Language Version© Jack Sealey limitedRefer toinstructions

/ 2

Related manuals for Sealey LED021