Sealey HT02LED Manual

2W & 1.5W SMD LED RECHARGEABLE CLIPLIGHT WITH AUTO SENSORMODEL NO: HT02LEDThank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to theseinstructions, and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. SAFETY1.1. GENERAL8 DO NOT shine directly into your, another person’s or an animal’s eyes.8 DO NOT allow children to use the torch.8 DO NOT use the torch if you suspect that the battery or the torch casing is damaged.1.2. BATTERY SAFETY WARNING! To reduce the risk of burns or fire:8 DO NOT attempt to open, disassemble, modify or service the batteries.8 DO NOT crush, puncture, short contacts or dispose of in fire or water.8 DO NOT expose to temperatures above 60°C (140°F).2. INTRODUCTION200/150 Lumen clip light with auto-sensor built-in. Light is designed to be clipped to the supplied headband or to a cap. Features frontdirectional torch and top spotlight with four settings including red light setting. Light easily flips up so you can alternate between lights quickly.Clip also features two magnets on the bottom enabling it to be used independently as a work light. Battery type: 3.7V Lithium-Polymer.Supplied with USB charging cable.3. SPECIFICATIONModel No:....................................................... HT02LEDBattery: .............................................3.7V 0.5Ah Li-PolyCharging time ..................................................1.5 HoursLumen Output: .............................................. 200/150lmOperating time .................................................2hr-12hr4. OPERATIONHT02LED Issue 4 (4) 12/05/23Original Language Version© Jack Sealey LimitedRefer toinstructionsSpot lightFlood light(Back)cap clip/ headband clip/magnetsSensor receiver spotlightOn/OffSwitch and motion sensor switchCharging port: Red/greenindicates charging status.Flashes green when motionsensor is activated.

/ 2

Related manuals for Sealey HT02LED