Sealey GSS2323 Instructions Manual

Also see for GSS2323: Instructions

INSTRUCTIONS FORGALVANIZED SHED 2.3 X 2.3 X 1.9MMODEL NO: GSS2323 & GSS2323GThank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. SAFETY WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when building this shed.9 Keep the work area clean, uncluttered and ensure there is adequate lighting.9 Keep children and unauthorised persons away from the working area.8 DO NOT use the shed for any purpose other than that for which it is designed.9 Use appropriate safety clothing including eye protection.8 DO NOT attempt to assemble in windy weather.Note: The assembly of this product will require assistance.2. INTRODUCTIONGalvanized steel panels easily assembled to form a rigid and secure gable roofed shed. Has a single door which is secured by cross bolt andeyelet that accepts a padlock (not included) for additional security. Supplied with bolt-down fixing kits.3. SPECIFICATIONModel no’s: ...........................................GSS2323/GSS2323GColour: .................................................................silver/greenRoof type:....................................................................... apexDoors: .................................................................................. 1Overall size (W x D x H*): ................. 2300 x 2300 x 1900mm* minimum wall height4. CONCRETE PLINTHConcrete slab: Please ensure that your site is level. It is recommended that your slab is 100mm thick and you use builders plastic and F52reinforcing mesh. We recommend that you make your slab 100mm bigger than the base dimensions of your shed. This will allow for a 50mmedge around your shed. We recommend that you slope the 50mm edges downward by 10 mm so that rain water will drain away from your shed.GSS2323/G | Issue:2(SP) 13/04/17Original Language Version© Jack Sealey LimitedRefer toinstructionmanualWear eyeprotection Wear safetyfootwear Weargloves