Sealey AP6601 Instructions Manual

Also see for AP6601: Instructions Quick start guide

INSTRUCTIONS FOR:ADD-ON CHEST/TOPCHEST/ROLLCAB -HEAVY DUTY - REDMODEL No's: AP6601/6610/6612Thank you for purchasing a Sealey product. Manufactured to a high standard these products will, if used according to these instructions andproperly maintained, give you years of trouble free performance.1. SAFETY INSTRUCTIONSIMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.USE THE PRODUCTS CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH THEY ARE INTENDED. FAILURE TO DO SO MAY CAUSEDAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.2. INTRODUCTION3. SPECIFICATION1.1. GENERAL SAFETY WARNING! Ensure Health & Safety, local authority, andgeneral workshop practice regulations are adhered to whenusing these units. Locate the units in a suitable work area. Keep the work area clean, uncluttered and ensure there isadequate lighting. WARNING! Use the Rollcab on level and solid ground,preferably concrete. Keep the units clean and tidy in accordance with goodworkshop practice. Keep children and unauthorised persons away from the workarea. DO NOT use these units for any purpose other than thatfor which they are designed. DO NOT use the units outdoors. DO NOT place the units in a damp or wet location or anarea where there is condensation. DO NOT clean the units with any solvents which maydamage the surfaces or the protective coating. DO NOT move the units with the drawers out. To avoidtipping, open one drawer at a time and close and secure alldrawers whilst moving the rollcab. DO NOT step on the drawers. DO NOT overload the drawers, weight limit per drawer is36kg.• All heavy gauged steel construction and manufactured withsteel inner walls for extra strength and durability.• Heavy-duty 45mm ball bearing drawer runners provide superiorperformance and carry heavier loads.• Full height rear locking mechanism, locks full-length drawers inmultiple locations.• Added security provided by tumbler locks, supplied with twofolding keys.• Rust and solvent resistant powder coat paint finish.• The rollcab is fitted with six Ø125mm plastic wheels, two fixedand four castors, two of which are lockable.• Topchest features heavy-duty side handles.• Rollcab features a high polished chrome handle for comfortand control when manoeuvring.• Rollcab supplied with a 10mm thick top mat to protect topsurface from scratching.• Drawers feature stylish aluminium drawer pulls and non-slipliners.Model No. AP6612 AP6610 AP6601Overall Size W x D x H (mm): 1684 x 466 x 985 1656 x 435 x 495 1664 x 440 x 170Full Width Large Drawer (mm): 1570 x 405 x 105 (x1) 1200 x 405 x 130 (x1) 1570 x 405 x 105 (x1)Small Drawer (mm): 1200 x 405 x 50 (x5) 1200 x 405 x 50 (x4) -Large Drawer (mm): 1200 x 405 x 130 (x1) - -Small ½ Drawer (mm): 325 x 405 x 50 (x4) 325 x 405 x 50 (x4) -X-Large ½ Drawer (mm): 325 x 405 x 235 (x1) 325 x 405 x 130 (x1) -Max. weight per wheel set: 900kgOriginal Language Version AP6601, 6610, 6612 Issue: 1 - 30/11/12© Jack Sealey LimitedAP6612AP6610AP6601

/ 2

Related manuals for Sealey AP6601