Sealey GSS1508G Instructions Manual

Also see for GSS1508G: Instructions

INSTRUCTIONS FOR:GALVANIZED STEEL SHED GREEN1.5 x 0.8 x 1.9mMODEL NO: GSS1508G WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when building this shed. Keep the work area clean, uncluttered and ensure there is adequate lighting. Keep children and unauthorised persons away from the working area. DO NOT use the shed for any purpose other than that for which it is designed. Use appropriate safety clothing including eye protection.NOTE: The assembly of this product will require assistance. DO NOT attempt assembly in windy conditionsIMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THEPRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONALINJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.1. SAFETY2. INTRODUCTION3. SPECIFICATION4. CONCRETE SLABGalvanized, steel panels easily assembled to form a rigid and secure shed. Has skillion (sloping) roofs and single doors. Doors are secured bycross bolt and eyelet which will accept a padlock (not included) for additional security. All models are supplied with bolt-down fixing kits.Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GSS1508GOverall Size (W x D X H*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1500 x 800 x 1900mmRoof Type: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Skillion*Minimum Wall Height.Concrete slab: Ensure that your site is level. It is recommended that your slab is 100mm thick and you use builders plastic and F52 reinforcingmesh. We recommend that you make your slab 100mm bigger than the base dimensions of your shed. This will allow for a 50mm edge around yourshed. We recommend that you slope the 50mm edges downward by 10 mm so that rain water can be drained away from your shed.Original Language Version© Jack Sealey Limited GSS1508G Issue: 1 - 28/08/14